![]() (Fireware v12.5 or higher) Next to the interface name, select Ingress, Egress, or both.To enable NetFlow for an interface: Tip! To quickly find an interface, select an option from the Type or Zone drop-down lists.(Fireware v12.3.x and v12.4.x) From the list of interfaces, select Firebox.(Fireware v12.5 or higher) Select Monitor traffic generated by the Firebox or Monitor traffic destined for the Firebox.If you enabled Sampling mode, in the adjacent text box, type a number between 5 packets.(Optional) To enable Sampling Mode, select the Sample every 1 out of check box. ![]() By default, the Active Flow Timeout value on the Firebox is 30 minutes. If the Active Flow Timeout value is lower on the collector, the collector might stop listening while the Firebox is sending data. We recommend that you specify an Active Flow Timeout value that is lower than the Active Flow Timeout value on the collector.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |